How to Protect Mercedes E63 Hybrid Exterior with PPF? | GVE London – Blog

The Mercedes E63 Hybrid is a masterpiece of engineering, combining luxury with high performance. To keep it looking pristine and maintain its value, protecting its exterior is crucial.

One of the most effective ways to do this is through Paint Protection Film (PPF). In this guide, we’ll explore how PPF can safeguard your Mercedes E63 Hybrid and provide a step-by-step approach to applying it.

Why Choose PPF for Your Mercedes E63 Hybrid?

• Protection Against Physical Damage: The E63 Hybrid’s sleek, high-performance design makes it susceptible to road debris and minor impacts. PPF acts as a shield against such damage, preserving the original paint and keeping your car looking brand new.
• UV Protection: Prolonged exposure to sunlight can cause paint to fade and oxidise. PPF provides a barrier that protects against UV rays, maintaining the vibrant colour and gloss of your vehicle.
• Self-Healing Properties: Modern PPFs have self-healing capabilities, meaning minor scratches and blemishes will disappear over time as the film “heals” itself when exposed to heat.
• Easy Maintenance: PPF makes washing your car easier. It repels dirt and grime, reducing the frequency and intensity of cleaning needed. It also helps prevent water spots and makes your car easier to maintain.

How to Apply PPF to Your Mercedes E63 Hybrid?

Applying PPF can be a meticulous process and you should consider visiting a supercar detailing centre like GVE London to get it applied to your supercar. Here’s a step-by-step guide to ensure a successful installation – 

Prepare the Surface

Before applying PPF, the surface of your E63 Hybrid must be thoroughly cleaned. Wash your car to remove any dirt, grime, and residues. After washing, decontaminate the surface with a clay bar to eliminate any remaining contaminants that could affect the film’s adhesion.

Inspect for Imperfections

Examine the paint for any imperfections such as scratches, swirl marks, or chips. Address these issues before applying PPF, as the film will seal any existing flaws. Depending on the severity, you might need to polish or correct the paint.

Measure & Cut the Film

PPF typically comes in large sheets or rolls. Measure the areas you want to cover and cut the film accordingly. It’s a good idea to leave some extra material around the edges to ensure full coverage and make adjustments as needed.

Apply the Film to Your Mercedes

For the application, you’ll need a few essential tools: a squeegee, a spray bottle with a soapy solution, and a heat gun. Start by spraying the soapy solution onto the surface of the car and the adhesive side of the PPF.

This helps the film slide into place and prevents air bubbles during the supercar detailing process. Place the PPF onto the desired area and carefully align it. Use the squeegee to smooth out the film, starting from the center and working your way to the edges. This helps to remove air bubbles and ensure proper adhesion.

Heat Up & Set the Film

Once the film is in place, use the heat gun to gently warm the PPF. This process helps activate the adhesive and allows the film to conform to the curves and contours of your car. Be cautious with the heat gun to avoid overheating and damaging the film or the paint underneath.

Trim Excess Film

After the film has adhered and set, trim any excess material using a sharp blade. Carefully cut along the edges of panels and trim areas to achieve a clean and precise finish.

Final Inspection

Inspect the entire installation for any imperfections, air bubbles, or wrinkles. Use the squeegee and heat gun as needed to correct any issues. Allow the film to cure for the recommended time, usually 24-48 hours, to ensure optimal adhesion and performance.

Conclusion

Protecting your Mercedes E63 Hybrid with Paint Protection Film is a smart investment to maintain its pristine appearance and resale value. By following the steps outlined above, you can successfully apply PPF and enjoy the benefits of enhanced protection, easy maintenance, and long-lasting beauty for your luxury vehicle.

For high-quality and error-free PPF installation on your Mercedes, remember to visit the GVE London supercar detailing centre. Here, you even get wrapping, bodyshop repairs, servicing, modifications, customisations, and more for your supercar.